沖床分板機的操作人員應配備一些高頻護眼裝置，不僅能有效保護操作人員的眼睛，還能有效提高操作人員的操作速度和質量。工業板材的切割不僅需要在一些強光的刺激下佩戴護眼裝置，還需要在操作沖床分板機的過程中使用護眼裝置，以有效防止一些灰塵和雜質進入眼睛，進而影響操作人員的切割工作。

The operator of punch plate separator should be equipped with some high frequency eye protection devices, which can not only effectively protect the eyes of operators, but also effectively improve the operation speed and quality of operators. The cutting of industrial plate not only needs to wear eye protection device under the stimulation of some strong light, but also needs to use eye protection device in the process of operating the punch separator, so as to effectively prevent some dust and impurities from entering the eyes, and then affect the cutting work of operators.

在使用沖床分板機的過程中，應適當安裝一些安全裝置，以有效避免人為疏忽造成的傷害。畢竟，對于那些更細心的人來說，不可避免地會小心翼翼地工作，偶爾也會被忽視。該安全裝置不僅能有效保護操作人員的安全，還能保證產品質量。調整切割距離時，不僅要按照要求的標準進行切割，而且要在使用沖床分板機時進行正確的操作，否則很難達到效果。

Some safety devices should be installed properly in the process of using the punch separator, so as to effectively avoid the injury caused by human negligence. After all, for those who are more careful, it is inevitable that they will work carefully and occasionally be ignored. The safety device can not only effectively protect the safety of operators, but also ensure the product quality. When adjusting the cutting distance, it is necessary not only to cut according to the required standard, but also to operate correctly when using the punching machine.

將印刷電路板的V型槽放入沖床分板機的分模機中，然后踩在腳上將電路板合上并分模。請記?。涸陔娐钒迩懈钸^程中，印刷電路板不會移動，圓刀會滑動，以確?；宓碾娮釉粫蛞苿佣鴵p壞。打開電源，設置上刀的行程(由印刷電路板的尺寸決定)和速度(速度燈熄滅時的低速操作，改為高速操作)。電源線的一端插入機身的電源插座，另一端連接220伏交流電源；將腳踏開關連接到腳踏開關的插座上，暫時不要打開電源開關；將機器放在水平工作臺上，將機器接地以防止靜電。每次工作后，清除機器上的碎屑。如果長時間不使用，上、下刀應涂上保護油以防生銹，滑軌應加滿潤滑油。

Put the V-shaped groove of printed circuit board into the parting machine of punching machine, and then step on the foot to close the circuit board and split the mold. Please remember: during the circuit board cutting process, the printed circuit board will not move and the round knife will slide to ensure that the electronic components of the substrate will not be damaged due to the movement. Turn on the power and set the stroke (determined by the size of the printed circuit board) and speed (change the low-speed operation to high-speed operation when the speed light is off). One end of the power cord is inserted into the power socket of the fuselage, and the other end is connected with 220 V AC power supply; connect the foot switch to the socket of the foot switch, do not turn on the power switch temporarily; put the machine on the horizontal workbench and ground the machine to prevent static electricity. Remove debris from the machine after each operation. If it is not used for a long time, the upper and lower knives should be coated with protective oil to prevent rust, and the slide rail should be filled with lubricating oil.

當沖床分板機不能正常工作時，可能是由于沖床分板機的電池充電不足、電池與啟動電機斷開、接線夾松動或電池極嚴重氧化。沖床分板機的不能夠正常運行很有可能是因為電磁開關偏轉器嚴重?zé)g或與兩個端子接觸不良、電刷過度磨損、彈簧斷裂或電刷架中的電子卡滑動引起的。

When the punching machine can not work normally, it may be due to insufficient battery charge, disconnection between battery and starting motor, loose wiring clamp or serious oxidation of battery. It is likely that the abnormal operation of the separator is caused by serious erosion of the electromagnetic switch deflector, poor contact with the two terminals, excessive wear of the brush, broken spring or sliding of the electronic card in the brush holder.

上述所講解的就是沖床分板機的操作注意事項，希望看完能夠?qū)δ兴鶐椭绻胍私飧嚓P(guān)于沖床分板機的相關信息的話，歡迎在線咨詢客服或是撥打本公司服務熱線（網站右上角）進行咨詢，我們講竭誠為您提供優質的服務！

What is explained above is the operation precautions of the punching machine. I hope that it can help you after reading. If you want to know more about the punching machine, please contact customer service online or call our service hotline (top right corner of the website) for consultation. We will wholeheartedly provide you with high-quality service!